ECI Multi Functional Weighing Controller Operating Manual
Page 70
4) Stability: The final filling weight is sent after the filling is over.(Baudrate is 9600 bps.) The format
of the data string sent is same as the Speed mode.
5) Command: This mode will be shown as locked as it is not active in filling program.
6) Printer: It is the printer connection option.
Auto Print
It is the printer operation mode selection. The
options are;
1) Manuel: Printing is only possible from the
"Report" screen.
2) After Filling: Printing operation is made
according to the settings in "Printer Settings
Menu" after the filling is completed. Key is
also used for manual printing at the report screen.
To Next Page
Loading...