Evolis Avansia - Page 21

Service Manual_AVA1_ENG-20220922_I 21
11. The card is fed by the Card Feed Roller 3 [1],
and the second side is printed.
12. The card is fed to the Decurl Assembly [3] by
Card Feed Rollers 4 [1] and 5 [2]. If there is a
decurl setting, the Decurl Plate [4] of the
Decurl Assembly descends and corrects
the curling of the card.
13. The card is fed and ejected by the Card
Feed Roller 5 [1].
[1]
[1]
[1]
[2]
[3]
[4]