Setup
216 FTBx-88000 Series
1588 PTP (Client)
Expected QL allows the selection of the expected quality level value.
Available when the QL Mismatch Monitoring check box is selected.
Profile
ITU
Quality Level
value
PTP
Clock
Class
Description
G.8265.1 QL-PRS 80 Primary Reference Source Traceable (G.811)
QL-STU/UNK 82 Synchronized - Traceability Unknown
QL-PRC (default) 84 Primary Reference Clock Traceable (G.811)
QL-ST2 86 Traceable to Stratum 2 (G.812 Type II)
QL-INV3 88 Quality Level Invalid 3
QL-SSU-A/TNC 90 Type I or V slave clock (G.812)
Traceable to Transit Node Clock (G.812 Type V)
QL-INV5 92 Quality Level Invalid 5
QL-INV6 94 Quality Level Invalid 6
QL-SSU-B 96 Type VI slave clock (G.812)
QL-INV9 98 Quality Level Invalid 9
QL-ST3E 100 Traceable to Stratum 3E (G.812 Type III)
QL-EEC2/ST3 102 Ethernet Equipment Clock Option 2
Traceable to Stratum 3 (G.812 Type IV)
QL-EEC1/SEC 104 Ethernet Equipment Clock Option 1
Synchronous Equipment Clock (G.813 or G.8262, Option 1)
QL-SMC 106 Traceable to SONET Minimum Clock (G.813 or G.8262, Option 2)
QL-PROV 108 Provisionable by the Network Operator (PNO)
QL-DNU/DUS 110 Do Not Use
Do Not Use for Synchronization
To Next Page
Loading...
