EXFO FTBx-88260 - Page 475

Setup
Power Blazer 459
Traces/PT - FlexO
 DAPI (Destination Access point Identifier) allows entering the DAPI
message to be generated (TTI bytes 16 to 31). The expected DAPI
message is available when the DAPI OTU-TIM / DAPI ODU-TIM check
box is selected.A maximum of 16 characters is allowed; 13 characters
for lower ODU layer since the channel number is automatically
appended to the message.
 Operator Specific allows entering the Operator Specific message to
be generated (TTI bytes 32 to 63). A maximum of 32 characters are
allowed.
TTI Traces Default Message
a
a. The default message contains a NULL (all 0’s) character preceding it. NULL (all 0’s)
characters are automatically appended to the message for bytes that are not
defined.
SM EXFO OTU DAPI
PM XFO ODU DAPI
b
b. For ODUk, the client ID is automatically appended to the message.
TTI Traces Default Message
a
a. NULL (all 0’s) characters are automatically appended to the message for bytes that
are not defined.
SM EXFO OTU OPERATOR SPECIFIC
PM XFO ODU OPERATOR SPECIFIC