Test Results
Power Blazer 571
Summary - EtherSAM
Remote unit in use and locked for Dual Test Set indicates that this
unit is used for Dual Test Set as the remote unit.
Service Configuration/Performance Test: Tap Service Configuration
Test or Service Performance Test button to view the result summary
of the corresponding test.
Service indicates the service’s number and name. For Service
Configuration Test, the number/name is highlighted in red per
service when VLAN mismatch occurred; in Dual Test Set or Dual
Port topology, the direction is also highlighted; in Dual Test Set, the
R -> L direction label is gray when VLAN Preservation is not
supported by the remote module.
Direction, available with Dual Test Set or Dual Port topology,
indicates respectively results for both local (L) and remote (R)
directions, or both port directions.
L2CP, available when both L2CP Handling Test and pass/fail
verdict are enabled, indicates the L2CP handling test pass/fail
verdict.
Service Performance Test column displays the pass/fail verdict
icon indicating if the service complies to the configured SLA
parameters.
Service Configuration Test column displays the pass/fail verdict
icon indicating if the service complies to the configured SLA
parameters.
To Next Page
Loading...
