CHAPTER 5
PAGE 25
PAGE DATE: 21. March 2014
MAINTENANCE MANUAL EXTRA 300LT
O O 34 Check tail wheel rubber tire condition.
O O 35 Inspect tail wheel fork and steering arm attachment stopnut
for security.
O O 36 Check the connector springs for light precompression.
O O 37 Check the wheel fork for free rotation and steering func-
tion, damage, dents, cracks and corrosion.
O O 38 Inspect axle bolt and nut for fretting, wear, damage and
stretch.
O O 39 Lubricate tail wheel steering.
Wing
O O 1 Check wing for dents, cracks, and delaminations.
O 2 Inspect wing spar main bolts for looseness and security.
O 3 Check the safety wire and the safety screw of the wing main
spar bolt.
O 4 Inspect wing spar flange bushing for looseness and bearing
load by moving the wing tip up and down to detect play. No
play allowed.
O 5 Inspect wing auxiliary spar attachment.
O 6 Inspect wing ventilation holes for obstruction.
O O 7 Check inside wing structure in the area of access panels and
root rib openings.
Stabilizer
O O 1 Inspect stabilizer for dents, cracks, stone nicks and de-
laminations.
O O 2 Inspect main bolts of the stabilizer spars for looseness and
check security.
O O 3 Inspect stabilizer auxiliary spars attachment.
O 4 Inspect stabilizer ventilation holes for obstruction.
Inspector:
Mechanic:
Date:
Serial No.:
Inspections
as specif
i
ed
eac
h
100 hours
eac
h
50 hours