Installing the BlackDiamond 8806 and BlackDiamond 12804 Chassis
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
108
6 On each side of the chassis, place one hand in the empty power supply bay and the other hand in
the recessed hand-hold on the back panel of the BlackDiamond 8806/12804 chassis. Carefully lift the
BlackDiamond 8806/12804 chassis off the foam cushion and onto the floor (see Figure 57).
Figure 57: Correct method for lifting the BlackDiamond 8806/12804 chassis
Do not use the fan tray handle to lift or maneuver the BlackDiamond 8806/12804 chassis. This handle is not
designed to support the weight of the chassis.
Verify that the following items are included in the crate:
● BlackDiamond 8806/12804 chassis with four installed blank front panels
● Power cord retaining bracket
● 19-inch helper bracket (installation tray)
● BlackDiamond documentation pack with ESD-preventive wrist strap
Save all packaging, clip locks, and box for future use in the event that the BlackDiamond 8806/12804 chassis
needs to be moved to another location or returned to Extreme Networks, Inc.
EX_112
To Next Page
Loading...
