Summit X450e Series Switches
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
273
For information regarding these compatible Summit option cards, see “Summit XGM2-2xn Option Card” on
page 297 or “Summit XGM2-2xf Option Card” on page 302.
● Optional: EPS-600LS External Power Module (Model No. 10913), which is the redundant power
supply unit for use with the Summit X450e-48p switch. The EPS-600LS is installed in the EPS-C
chassis (Model No. 10912). The EPS-C chassis can hold up to three EPS-600LS units. The PoE
capability of the Summit X450e-48p switch varies depending on the number of external power
modules in use. For complete details, see “EPS-600LS External Power Module” on page 328.
Summit X450e-48p Switch Front Panel
Figure 193 shows the front panel of the Summit X450e-48p switch.
Figure 193: Summit X450e-48p switch front panel
The front panel on the Summit X450e-48p switch includes:
● LEDs—For a description of the LEDs and their behavior, see “Summit X450, X450a, and X450e Series
Switch LEDs” on page 276.
● Stack number indicator—Numeric indicator of the position of this switch in a stacked configuration.
● Combination ports—Four combination ports that provide 10/100/1000 BASE-T PoE or mini-GBIC
connectivity for 4 Gbps of copper or fiber connectivity.
● 10/100/1000 BASE-T PoE ports—Forty-four 10/100/1000 BASE-T PoE ports that deliver high-
density copper connectivity and a full 15.4 Watts of PoE per port
● Console port—Serial port used to connect a terminal and perform local management.
STACK NO.
Stack
10G
MGMT
FAN
PSU-1
PSU-E
Solid ON = Link
Blinking = Activity
2
1
1
2
1
2
4
3
6
5
8
7
10
9
12
11
14
13
16
15
18
17
20
19
22
21
24
23
26
25
28
27
30
29
32
31
34
33
36
35
38
37
40
39
42
41
4443 4645 48
47
46X
45X
48X
47X
Shared Ports
SH_030A
Shared ports
Console
port
10/100/1000 Mbps ports
Stack number
indicator
To Next Page
Loading...
