Summit X450a Series Switches
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
269
Summit X450a-48tDC Switch Rear Panel
Figure 188 shows the rear panel of the Summit X450a-48tDC switch.
Figure 190: Summit X450a-48tDC switch rear panel
The rear panel on the Summit X450a-48tDC switch includes:
● Slot for a Summit option card
■ Summit XGM2-2xn option card, which allows you to add up to two 10 Gigabit XENPAK modules
OR
■ Summit XGM2-2xf option card, which allows you to add up to two 10 Gigabit XFP modules
For information regarding these compatible Summit option cards, see “Summit XGM2-2xn Option Card” on
page 297 or “Summit XGM2-2xf Option Card” on page 302.
● Management port
■ Used to connect the system into a parallel management network for administration.
OR
■ Used to connect an Ethernet cable directly from your laptop into the management port to view
and locally manage the switch configurations.
● Two LEDs for the management port, located in the bottom corners of the port.
● Two high-performance stacking ports
● Redundant power input connector for an optional, redundant Extreme External Power Supply (see
“EPS-500 External Power Supply Unit” on page 317 for complete details). The connecting redundant
power supply cable is shipped with the EPS-500.
● AC power socket
The switch automatically adjusts to the supply voltage. The power supply operates from 100 VAC to
240 VAC.
10 Gigabit
uplink option
Management port
10 Gigabit
stacking ports
DC power
socket
External power
supply connection
Grounding
point
SH_034B
To Next Page
Loading...
