BlackDiamond 10808 Series Modules
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
84
G60X Module
Figure 40 shows the G60X module.
Figure 40: G60X module
The G60X module has 60 unpopulated mini-GBIC-based Gigabit Ethernet fiber ports. If you have one
MSM installed, all ports on the G60X module are switched through that MSM. If you have two MSMs
installed, the top 30 ports on the G60X module are switched through the MSM in slot A, and the bottom
30 ports are switched through the MSM in slot B during normal operation.
All Gigabit Ethernet ports on these modules use SFP fiber mini-GBIC connectors and support
1000BASE-SX, 1000BASE-LX, 1000BASE-LX70, and 1000BASE-ZX ports.
The default configuration of the G60X module is as follows. All ports:
● Are added to the default VLAN as untagged
● Inherit the properties of the default VLAN (for example, protocol type and VLANid)
Mini-GBIC Ports
The G60X module supports any of the following mini-GBICs:
● SX mini-GBIC, which conforms to the 1000BASE-SX standard
● LX mini-GBIC, which conforms to the 1000BASE-LX standard
● ZX mini-GBIC, which conforms to the IEEE 802.3z standard
For more information about the supported mini-GBIC types and specifications, see “Mini-GBIC Interfaces” on
page 338.
EX_005
Module status LEDs
Mini-GBIC
ports
To Next Page
Loading...
