Extreme Networks BlackDiamond 8800 Series - Rack-Mounting the Blackdiamond 8806;12804 Chassis

Installing the BlackDiamond 8806 and BlackDiamond 12804 Chassis
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
110
Figure 58: Attaching the mid-mount brackets to the BlackDiamond 8806/12804 chassis
Rack-Mounting the BlackDiamond 8806/12804 Chassis
To mount the BlackDiamond 8806/12804 chassis in a rack:
1 Locate the 19-inch helper bracket that is shipped with the BlackDiamond 8806/12804 chassis.
2 Identify the rack location where the chassis will be installed.
3 Using four rack mounting screws, attach the helper bracket to the system rack immediately below
the chassis location (see Figure 59).
You must provide the screws for attaching the helper bracket.
EX_136
Mid-mount
bracket
Second mid-mount location