About the BlackDiamond 10808 I/O Modules
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
89
10G2X LEDs
The 10G2X module has the following LEDs:
● Module status
● Port status
For information about the LEDs and their activity on the 10G2X module, see “I/O Module LEDs” on
page 91.
10G2H Module
Figure 44 shows the 10G2H module.
Figure 44: 10G2H module
The 10G2H module has the following:
● 2 unpopulated XENPAK-based 10 Gigabit Ethernet ports
● 20 10/100/1000BASE-T RJ-45-connector ports
● 20 unpopulated mini-GBIC-based Gigabit Ethernet fiber ports
The default configuration of the 10G2H module is as follows. All ports:
● Are added to the default VLAN as untagged
● Inherit the properties of the default VLAN (for example, protocol type and VLANid)
EX_116
Module status LEDs
RJ-45
connector
ports
Mini-GBIC ports
10 Gbs ports
To Next Page
Loading...
