Extreme Networks BlackDiamond 8800 Series - Safety

Summit External Power Supplies (EPS)
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
308
Safety
Only trained service personnel should perform service to Extreme Networks switches and their
components. Trained service personnel have read all related installation manuals, have the technical
training and experience necessary to be aware of the hazards to which they are exposed in performing a
task, and are aware of measures to minimize the danger to themselves or other persons.
NOTE
See Appendix A, “Safety Information” for additional safety information and Appendix B, “Technical Specifications”
for additional information regarding regulatory compliance certifications.
CAUTION
Be sure that proper ESD controls are in use before switch maintenance is performed. This includes but is not
limited to wrist straps that are grounded to the switch chassis and earth grounds.
Summit X450e Series Switches
Summit X450e-24p EPS-LD External Power Supply Unit 45019
Summit X450e-48p EPS-600LS External Power Module with
EPS C Chassis
EPS-600LS: 10913
EPS-C: 10912
Summit X250e Series Switches
Summit X250e-24t EPS-160 External Power Module with EPS-T EPS-160: 10907
EPS-T: 10906
Summit X250e-24p EPS-500 External Power Supply Unit 10911
Summit X250e-48t EPS-160 External Power Module with EPS-T EPS-160: 10907
EPS-T: 10906
Summit X250e-48p EPS-600LS External Power Module with
EPS C chassis
EPS-600LS: 10913
EPS-C: 10912
Table 38: Summit switch and EPS compatibility (Continued)
Switch Model Compatible EPS Model Number