Repacking the BlackDiamond 10808 Chassis
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
235
Repacking the BlackDiamond 10808 Chassis
To repack the BlackDiamond 10808 chassis for return to Extreme Networks, you must recrate it using
the original packaging materials.
Contact Extreme Networks Customer Support for instructions on returning the chassis.
The BlackDiamond 10808 chassis weighs more than 100 lb (45 kg). Correct lifting procedures for the chassis
require two people.
To recrate the chassis:
1 Mount the helper bracket in the rack using four appropriate screws (not provided) (see Figure 161).
Figure 161: Helper bracket for the BlackDiamond 10800 series chassis
2 With one person on each side of the chassis, remove the chassis from the rack and place it onto the
pallet.
To Next Page
Loading...
