Repacking a BlackDiamond Chassis
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
236
3 Attach all four restraining bolts to the four shipping brackets to secure the BlackDiamond 10808
chassis to the shipping pallet (see Figure 162).
4 Slide the carton down over the chassis (see Figure 162).
Figure 162: Securing the BlackDiamond 10808 series chassis to the shipping pallet
5 Engage the four plastic clip locks near the bottom of the shipping carton (see Figure 163).
Two clip locks are located on opposite sides of the carton.
Figure 163: Location of clip locks
EX_088C
Install 4 bolts
securing chassis
to pallet
Slide carton
down over
chassis
EX_182
Pallet
Clip locks
Cardboard box
To Next Page
Loading...
