Repacking the BlackDiamond 10808 Chassis
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
237
a Place your thumb and index finger inside the clip lock adjacent to the two vertical prongs (see
Figure 164).
b Press the prongs inward, applying equal pressure on each side.
c Press the prongs into the carton until the clip clicks into place.
Repeat steps 5a through 5c to engage each of the remaining three clip locks.
Figure 164: Installing the clip locks
6 Insert the four v-boards in the corners of the crate (see Figure 165).
Figure 165: Inserting the v-boards
EX_087C
Clip lock
Close
lock
Squeeze prongs
to unlock
EX_093
Accessory box
To Next Page
Loading...
