Summit X450 Series Switches
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
253
The front panel on the Summit X450-24t switch consists of:
● LEDs—For a description of the LEDs and their behavior, see “Summit X450, X450a, and X450e Series
Switch LEDs” on page 276.
● Stack number indicator—Numeric indicator of the position of this switch in a stacked configuration.
● Combination ports—Four combination ports that provide 10/100/1000 BASE-T or mini-GBIC
connectivity for 4 Gbps of copper or fiber connectivity.
● 10/100/1000 BASE-T Ethernet ports—Twenty 10/100/1000 BASE-T Ethernet ports that deliver high-
density copper connectivity in 1.75-inch (1U) form factor.
● Console port—Serial port used to connect a terminal and perform local management.
Summit X450-24t Switch Rear Panel
Figure 176 shows the rear panel of the Summit X450-24t switch.
Figure 176: Summit X450-24t switch rear panel
The rear panel on the Summit X450-24t switch includes:
● Slot for the Summit XGM-2xn option card, which allows you to add up to two 10 Gigabit XENPAK
modules (
see “Summit XGM-2xn Option Card” on page 295 for complete details)
● Management port
■ Used to connect the system into a parallel management network for administration.
OR
■ Used to connect an Ethernet cable directly from your laptop into the management port to view
and locally manage the switch configurations.
● Two LEDs for the management port, located in the bottom corners of the port.
● Two high-performance stacking ports
● Redundant power input connector for an optional, redundant Extreme External Power Supply (see
“EPS-160 External Power Module (with EPS-T)” on page 309 for complete details). The connecting
redundant power supply cable is shipped with the EPS-160.
● AC power socket
The switch automatically adjusts to the supply voltage. The power supply operates from 100 VAC to
240 VAC.
S450_003A
10 Gigabit
uplink option
Management port
10 Gigabit
stacking ports
Power socket
External power
supply connection
To Next Page
Loading...
