Extreme Networks BlackDiamond 8800 Series - MID-Mounting a Blackdiamond 12802 Chassis

Installing the BlackDiamond 12802 Chassis
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
118
4 Attach the chassis to the system rack using eight rack system mounting screws (screws not
provided). Refer to Figure 64 for the screw locations.
Figure 64: Securing the BlackDiamond 12802 chassis to the rack (front-mount position)
Mid-Mounting a BlackDiamond 12802 Chassis
To mid-mount the BlackDiamond 12802 chassis in a rack:
1 Place each mounting bracket against the switch chassis with the mounting flange at the middle of
the chassis side (Figure 65).
Figure 65: Mounting flanges at the middle
2 Insert and tighten the provided flat-head screws to secure the brackets to the chassis.
3 Slide the chassis into the equipment rack.
4 Attach the chassis to the system rack using eight rack system mounting screws (screws not
provided). Refer to Figure 66 for the screw locations.
BD_151
Bracket
Bracket
Screw
BD_143