Power Supplies for the BlackDiamond Family of Switches
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
395
Power Supplies for the BlackDiamond Family of
Switches
This section lists specifications for the power supplies that are installed in the following BlackDiamond
switches:
● BlackDiamond 8800 series switches
● BlackDiamond 10808 switch
● BlackDiamond 12804 switch
● BlackDiamond 12802 switch
Table 81: Power supply specifications for BlackDiamond switches
AC SSI PS Model
#60020/PS2336 (700/1200 W
AC PSU)s
For the BlackDiamond 8800 series switches, BlackDiamond 10808 switch, and
BlackDiamond 12804 switch
Typical configuration 3 power supplies
Full configuration 6 power supplies
Input Nominal input: 100 to 240 V~, 60/50 Hz, 10 A max
AC voltage input range: 90 to 264 V~
Maximum input amperages:
7 A @ 200 V~ (high-line)
10 A @ 90 V~ (low-line)
AC line frequency: 47 to 63 Hz
PS input socket: IEC 320 C14
Minimum wire size: 16 AWG (1.31mm
2
) copper stranded
Output DC output: 48 V , 24 A/12 V , 4 A (high-line)
48 V , 13.5 A/12 V , 4 A (low-line)
DC output power (W): 700 to 1200 W
Power supply cord selection Refer to “Power Supply Cords Selection” on page 375.
AC power supply input socket IEC 320 C14
Minimum wire size 16 AWG (1.0mm
2
) copper stranded
(pre-approved cord set for county of use)
Operating conditions Operating temperature: 0° C to 40° C
Storage temperature: –40° C to 70° C
Operating humidity: 10% to 90% relative humidity, non-condensing
Operational shock: 30 m/s
2
(3 g)
AC PS Model #41050
(600/900 W AC PSU)
For the BlackDiamond 8806 switch
Typical configuration 3 power supplies
Full configuration 6 power supplies
Input Nominal input voltage: 100 to 240 V~, 60/50 Hz, 8 A max
Voltage input range/frequency range: 90 to 264 V~
AC line frequency: 47 to 63 Hz
Maximum input amperages:
5 A @ 200 V~ (high-line)
8 A @ 90 V~ (low-line)
Input socket: IEC 320 C14
Minimum wire size: 16 AWG (1.31mm
2
) copper stranded (pre-approved cord
set for country of use)
To Next Page
Loading...
