Extreme Networks BlackDiamond 8800 Series - I;O Module Leds; Module Leds; Port Leds on Non-Poe Modules

BlackDiamond 8800 Modules
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
66
I/O Module LEDs
This section describes the LEDs for the module, for the port, and for inline power delivery status for
I/O modules in the BlackDiamond 8800 series of switches.
NOTE
Inline power delivery applies only to the ports on the G48P and G48Pe I/O modules.
Module LEDs
Table 7 describes the LED activity for all BlackDiamond 8800 series I/O modules.
Port LEDs on Non-PoE Modules
This section describes the port LEDs for non-PoE BlackDiamond 8800 series I/O modules. These
include the G24X, G48T, 10G4X, G48Ta, G48Xa, G48Te, 10G4Xa, and 10G4Ca I/O modules.
Table 8 describes the LED meanings for each port on the non-PoE BlackDiamond 8800 series I/O
modules.
Table 7: BlackDiamond 8800 series I/O module LEDs
LED Color Indicates
Status Green blinking
Amber blinking
Off
Normal operation
Configuration error, code version error, diagnostic failure, or
other severe module error
No power
DIAG Off
Amber blinking
Amber
Normal operation
Diagnostics in progress
Diagnostic failure
Table 8: Port LEDs for the G24X, G48T, 10G4X, G48Ta, G48Xa, G48Te, 10G4Xa, and 10G4Ca
I/O modules
LED Color Indicates
Port Solid green
Slow green blinking
Green blinking
Off
Link up
Port disabled
Activity
Link down