Summit Family of Switches
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
268
For centralized DC power connection, this product is intended to be installed in Restricted Access Locations
(Dedicated Equipment Rooms, Equipment Closets, or the like) in accordance with Articles 110-16, 110-17, and
110-18 of the National Electric Code, ANSI/NFPA 70.
Summit X450a-48tDC Switch Front Panel
Figure 187 shows the front panel of the Summit X450a-48tDC switch.
Figure 189: Summit X450-48tDC switch front panel
The front panel on the Summit X450a-48tDC switch includes:
● LEDs—For a description of the LEDs and their behavior, see “Summit X450, X450a, and X450e Series
Switch LEDs” on page 276.
● Stack number indicator—Numeric indicator of the position of this switch in a stacked configuration.
● Combination ports —Four combination ports that provide 10/100/1000 BASE-T or mini-GBIC
connectivity for 4 Gbps of copper or fiber connectivity.
● 10/100/1000 BASE-T Ethernet ports—Forty-four 10/100/1000 BASE-T Ethernet ports that deliver
high-density copper connectivity in 1.75-inch (1U) form factor.
● Console port—Serial port used to connect a terminal and perform local management.
STACK NO.
Stack 10G
MGMT
FAN
PSU-1
PSU-E
Band On = Link
Blinking = Activity
21
1
2
1
2
4365871091211 1413 1615 1817 2019 2221 2423 2625 2827 3029 3231 3433 3635 3837 4039 4241 4443 4645 4847 46X45X 48X47X
Shared Ports
SH_016B
Stack number
indicator
To Next Page
Loading...
