BlackDiamond Cable Management
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
204
2 Slide the ends together and push the cable holders together until you feel them snap into place (see
Figure 134).
Figure 134: Connected cable holders
3 Connect as many cable holders together as you need to manage your cable bundles.
4 To disconnect the holders, grasp one in each hand firmly and carefully pull them apart.
Connecting Cable Clips
To connect the cable clips:
1 Hold two clips next to each other with the split sides facing the same way (see Figure 135).
2 Slide the connecting grooves together (see Figure 135).
Figure 135: Connecting cable clips
ENIN004
ENIN001A
To Next Page
Loading...
