Extreme Networks BlackDiamond 8800 Series - Summit X450 E-48 P Switch

Summit Family of Switches
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
272
The rear panel on the Summit X450e-24p switch includes:
● Slot for a Summit option card
■ Summit XGM2-2xn option card, which allows you to add up to two 10 Gigabit XENPAK modules
OR
■ Summit XGM2-2xf option card, which allows you to add up to two 10 Gigabit XFP modules
NOTE
For information regarding these compatible Summit option cards, see “Summit XGM2-2xn Option Card” on
page 297 or “Summit XGM2-2xf Option Card” on page 302.
● Management port
■ Used to connect the system into a parallel management network for administration.
OR
■ Used to connect an Ethernet cable directly from your laptop into the management port to view
and locally manage the switch configurations.
● Two LEDs for the management port, located in the bottom corners of the port.
● Two high-performance stacking ports
● Redundant power input connector for an optional, redundant Extreme External Power Supply with
full PoE power support (see “EPS-LD External Power Supply Unit” on page 313 for complete
details). The connecting redundant power supply cable is shipped with the EPS-LD.
● AC power socket
The switch automatically adjusts to the supply voltage. The power supply operates from 100 VAC to
240 VAC.
Summit X450e-48p Switch
The Summit X450e-48p switch includes the following:
● 44 fixed 10/100/1000 BASE-T PoE ports that deliver high-density copper connectivity and a full 15.4
Watts of PoE per port (ports 1-44) when used with the EPS-C/EPS-600LS
● Four combination ports that provide 10/100/1000 BASE-T PoE or mini-GBIC connectivity for 4 Gbps
of copper or fiber connectivity (ports 45-48)
● All 48 ports are capable of providing PoE power
NOTE
For information about mini-GBICs, see “Mini-GBIC Interfaces” on page 338.
● Two high-performance stacking ports
● Optional:
■ Summit XGM2-2xn option card, which allows you to add up to two 10 Gigabit XENPAK modules
■ Summit XGM2-2xf option card, which allows you to add up to two 10 Gigabit XFP modules