Summit X250e Series Switches
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
245
● Combination ports—Two combination ports that provide 10/100/1000 BASE-T PoE or mini-GBIC
connectivity for 2 Gbps of copper or fiber connectivity.
● Console port—Serial port used to connect a terminal and perform local management.
Summit X250e-24p Switch Rear Panel
Figure 170 shows the rear panel of the Summit X250e-24p switch.
Figure 170: Summit X250e-24p switch rear panel
The rear panel on the Summit X250e-24p switch includes:
● Management port
■ Used to connect the system to a parallel management network for administration.
OR
■ Used to connect an Ethernet cable directly from your laptop into the management port to view
and locally manage the switch configurations.
● Two LEDs for the management port, located in the bottom corners of the port.
● Two high-performance stacking ports with associated LEDs
● Redundant power input connector for an optional, redundant EPS-500 Power Supply with full PoE
power support (see “EPS-500 External Power Supply Unit” on page 317 for complete details). The
connecting redundant power supply cable is shipped with the EPS-500 unit.
● AC power socket
The switch automatically adjusts to the supply voltage. The power supply operates from 100 VAC to
240 VAC.
Summit X250e-48t Switch
The Summit X250e-48t switch is a compact unit 1.75 inches high (1 U) that includes the following:
● Forty-eight fixed 10/100BASE-T ports (ports 1–48) that deliver high-density copper connectivity for
4.8 Gbps
● Two combination ports (ports 49–50) that provide 10/100/1000 BASE-T or mini-GBIC connectivity
for 2 Gbps of copper or fiber connectivity
10 Gigabit
stacking ports
Management port
Power socket
External power
supply connection
SH_041
To Next Page
Loading...
