Extreme Networks BlackDiamond 8800 Series - MSM Leds

About the BlackDiamond 10808 MSMs
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
81
MSM LEDs
Table 15 describes the LED activity on the BlackDiamond 10808 MSM.
NOTE
To reset the critical software error LED (amber ERR LED), use the clear log static command and reboot the
switch. If you continue to have critical software errors, or the ERR LED is amber after the clear log static
command and a switch reboot, contact Extreme Networks Customer Support.
Table 15: MSM LEDs
LED Color Indicates
SYS Green blinking
Amber blinking
Amber
Off
Normal operation is occurring.
Diagnostic test is in progress.
Diagnostic failure has occurred.
Switch is not receiving power.
MSTR Green
Amber
Module is operating as primary.
Module is operating as backup.
ENV Green
Amber
Environment (temperature, fan, power supply) is operating properly.
Environmental failure has occurred.
ERR Amber
Off
A critical software error has been logged since power up.
Normal operation is occurring.
Link/Activity Off
Green
Amber
Link is down.
Link is up.
Packet activity is occurring.