Summit Family of Switches
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
266
Summit X450a-48t Switch Front Panel
Figure 187 shows the front panel of the Summit X450a-48t switch.
Figure 187: Summit X450-48t switch front panel
The front panel on the Summit X450a-48t switch includes:
● LEDs—For a description of the LEDs and their behavior, see “Summit X450, X450a, and X450e Series
Switch LEDs” on page 276.
● Stack number indicator—Numeric indicator of the position of this switch in a stacked configuration.
● Combination ports—Four combination ports that provide 10/100/1000 BASE-T or mini-GBIC
connectivity for 4 Gbps of copper or fiber connectivity.
● 10/100/1000 BASE-T Ethernet ports—Forty-four 10/100/1000 BASE-T Ethernet ports that deliver
high-density copper connectivity in 1.75-inch (1U) form factor.
● Console port—Serial port used to connect a terminal and perform local management.
Summit X450a-48t Switch Rear Panel
Figure 188 shows the rear panel of the Summit X450a-48t switch.
Figure 188: Summit X450a-48t switch rear panel
The rear panel on the Summit X450a-48t switch includes:
● Slot for a Summit option card
■ Summit XGM2-2xn option card, which allows you to add up to two 10 Gigabit XENPAK modules
OR
■ Summit XGM2-2xf option card, which allows you to add up to two 10 Gigabit XFP modules
STACK NO.
Stack 10G
MGMT
FAN
PSU-1
PSU-E
Band On = Link
Blinking = Activity
21
1
2
1
2
4365871091211 1413 1615 1817 2019 2221 2423 2625 2827 3029 3231 3433 3635 3837 4039 4241 4443 4645 4847 46X45X 48X47X
Shared Ports
SH_029
10 Gigabit
uplink option
Management port
10 Gigabit
stacking ports
Power socket
External power
supply connection
To Next Page
Loading...
