Extreme Networks BlackDiamond 8800 Series - GM-20 T Leds; GM-20 XT and GM-20 XTR I;O Modules

BlackDiamond 12800 Series I/O Modules
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
75
The default configuration of the GM-20T I/O module is as follows. All ports:
● Are added to the default VLAN as untagged.
● Inherit the properties of the default VLAN (for example, protocol type and VLANid).
● Operate in autonegotiation mode.
GM-20T LEDs
The GM-20T I/O module has the following LEDs:
● Module status
● Module diagnostics
● Port status
● Power status
GM-20XT and GM-20XTR I/O Modules
Figure 33 shows the GM-20XT I/O module.
Figure 33: GM-20XT I/O module
Figure 34 shows the GM-20XTR I/O module.
Figure 34: GM-20XTR I/O module
NOTE
Although the GM-20XT module and the GM-20XTR module are similar in appearance, they have different
functionality. The GM-20XTR is part of the R series and includes the rate limiting feature; the GM-20XT module
does not support rate limiting.
To use rate limiting, you must install the MSM-5R plus the GM-20XTR I/O module and/or the XM-2XR I/O module.
EX_153h
10/100/1000BASE-T ports
Mini-GBIC
fiber ports
Module status
LEDs
EX_154h
10/100/1000BASE-T ports
Mini-GBIC
fiber ports
Module status
LEDs