Unpacking the Chassis and Preparing the Rack
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
127
Figure 72: Location of clip locks
a Place your thumb and index finger inside the clip lock (see Figure 73) adjacent to the two vertical
prongs located there.
b Press the prongs inward, applying equal pressure on each side.
c Pull the prongs toward you until the clip lock is released from the carton.
d Repeat steps 2a through 2c to release each of the remaining three clip locks.
Figure 73: Removing the clip locks
3 Slide the carton up over the chassis, as shown in Figure 74.
EX_182
Pallet
Clip locks
Cardboard box
EX_087B
Clip lock
Open
lock
Squeeze prongs
to unlock
To Next Page
Loading...
