Extreme Networks BlackDiamond 8800 Series - Page 232

Repacking a BlackDiamond Chassis
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
232
7 Slide the top of the BlackDiamond shipping carton down and over the BlackDiamond 8806/12804
chassis (see Figure 156).
Figure 156: Replacing the carton over the BlackDiamond 8806/12804 chassis
8 Insert the clip locks (see Figure 157).
a Place your thumb and index finger inside the clip lock touching the prongs.
b Squeeze the prongs inward, applying equal pressure on each side.
c Push the prongs inward until the clip lock is secured onto the carton.
Repeat steps 8a through 8c to insert each of the remaining clip locks.
CAUTION
Proper installation of the clip locks is critical for safe shipment of the BlackDiamond 8806/12804 chassis. Make
sure that the clip locks are secure and accurately installed.
Figure 157: Clip locks on the BlackDiamond 8806/12804 chassis shipping carton
ASP016a
EX_121
Place box
over
chassis
Insert & close
4 clip locks
to secure box
EX_111A
Clip lock
Open
lock
Squeeze prongs
to unlock