Extreme Networks BlackDiamond 8800 Series - Page 251

Summit X250e Series Switch LEDs
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
251
I/O and Uplink Port LEDs
Port number
1–24 or 1–48
Steady green Link is OK.
Blinking green Port is transmitting packets.
Off Link is not present.
Port number
25, 26 or 49, 50
(Shared ports)
Steady green Link OK
Blinking green Activity
Additional Port LED Meanings for PoE Switches: Summit X250e-24p & Summit X250e-48p
All front-panel ports Steady green Link OK. port not powered.
Steady amber Link OK, port is powered, no traffic
Blinking green Link OK, transmitting packets, port not powered.
Blinking amber Link OK, transmitting packets, port is powered.
Slow blinking
amber
No link or disabled port, port is powered
Alternating amber
and green
Port has a power fault.
Off Port is not powered, has no link, or is disabled.
Stacking Port LEDs
Stack 1,2 (front panel)
Stack Port 1, Stack Port 2
(rear panel)
Steady green Link OK
Blinking green Activity
Off No link
Other LEDs
Management Port
(rear panel)
Right LED:
Steady green
Link OK
Left LED:
Blinking green
Activity
Table 29: LEDs on the Summit X250e series switches (Continued)
Label or Type Color/State Meaning