Extreme Networks BlackDiamond 8800 Series - Page 344

Extreme Networks Optics
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
344
Table 55 lists the specifications for the 100FX mini-GBIC interface.
Table 54: 100FX mini-GBIC software support in Summit switches
(compatible modules listed only)
Summit Switch Model Required ExtremeXOS Version Port Support
Summit X450 Series Switches
Summit X450-24x ExtremeXOS 11.4.3 or later for 11.4 stream
ExtremeXOS 11.5.2 or later
ExtremeXOS 11.6.1 or later
Supported on fiber ports 5 through 24.
Not supported on combination ports 1
through 4.
Summit X450a Series Switches
Summit X450a-24x ExtremeXOS 11.6.1 or later Supported on fiber ports 1through 20.
Not supported on combination ports 21
through 24.
Summit X450a-
24xDC
ExtremeXOS 11.6.1 or later Supported on fiber ports 1through 20.
Not supported on combination ports 21
through 24.
Summit X250e Series Switches
Summit X250e-24t ExtremeXOS 12.0 or later Supported on fiber combination ports
25x and 26x.
Summit X250e-24p ExtremeXOS 12.0 or later Supported on fiber combination ports
25x and 26x.
Summit X250e-48t ExtremeXOS 12.0 or later Supported on fiber combination ports
49x and 50x
Summit X250e-48p ExtremeXOS 12.0 or later Supported on fiber combination ports
49x and 50x
Table 55: 100FX mini-GBIC specifications
Parameter Minimum Maximum
Transmitter
Average launch power -20 dBm -14 dBm
Center wavelength 1270 nm 1380 nm
Receiver
Receive sensitivity -31 dBm
Average receive power (max) -14 dBm
Distance range over each fiber type
62.5/125 μm MMF 2 m 2000 m
50/125 μm MMF 2 m 2000 m