Extreme Networks BlackDiamond 8800 Series - Page 397

Power Supplies for the BlackDiamond Family of Switches
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
397
Output DC Output:
48 V , 6 A/12 V
2.5 A/7 VSB 0.75 A
Output power (W): 325 W
Operating conditions Operating temperature: 0° C to 40° C
Storage temperature: –40° C to 70° C
Operating humidity: 10% to 90% relative humidity, non-condensing
Operational shock: 30 m/s
2
(3 g)
DC PS Model #65022
(325 W DC PSU)
For the BlackDiamond 12802 switch
Minimum configuration 2 power supplies
Full configuration 4 power supplies
Input Nominal input voltage: –48 V~, –60 V~, 15 A maximum
Operational voltage range: –40 V to –72 V~
Maximum input amperages:
10 A @ –40 V~ (low-line)
8 A @ –48 V~
7 A @ –60 V~ (high-line)
Maximum in-rush current: 8 A
Input circuit protection: 15 A
Wire harness provided by Extreme Networks with each power supply.
Extreme part number 4340-00028
Minimum wire size: 14 AWG (1.3 mm
2
) copper stranded
(pre-approved cord set for county of use)
Connector: Molex connector PN 42816-0312
Connector pins: Molex connector pins PN 42815-0032
Output DC Output:
48 V , 6 A/ 12 V
2.5 A/7 VSB 0.75 A
Output power (W): 325 W
Operating conditions Operating temperature: 0° C to 40° C
Storage temperature: –40° C to 70° C
Operating humidity: 10% to 90% relative humidity, non-condensing
Operational shock: 30 m/s
2
(3 g)
Table 81: Power supply specifications for BlackDiamond switches (Continued)