Extreme Networks BlackDiamond 8800 Series - Page 412

Technical Specifications
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
412
Power supply cord gauge 18 AWG (0.82mm
2
; less than 2 m) or 16 AWG (1.3mm
2
) copper
stranded
Heat dissipation 125 W
Power consumption 625 W
Operating conditions Temperature: 0° C to 40° C (32° F to 104° F)
Humidity: 10% to 93% relative humidity, non-condensing
Altitude: 0 to 3,000 meters (9,850 feet)
Shock (half sine): 30 m/s
2
(3 g), 11 ms, 60 shocks
Random vibrations: 3 to 500 Hz @ 1.5 g rms
Maximum in-rush current 30 A @ 115 V/60 Hz, maximum load
Efficiency 80% with 60% to 100% load
EPS-600LS External Power Module
Model 10913
For use with the Summit X450e-48p and X250e-48p switches
Must be installed in the EPS-C chassis (Model 10912)
Operational voltage range 85 to 264 V~
Nominal input ratings 100-250 V~, 50-60 Hz, 10 A
Nominal input current 7 A @ 115 V~ (low-line)
3.5 A @ 230 V~ (high-line)
Line frequency range 47 to 63 Hz
Output power 600 W
Power supply input socket IEC 320 C14
Power cord input plug IEC 320 C13
Power cord wall plug Refer to “Power Supply Cords Selection” on page 375.
Minimum wire size 18 AWG (0.82mm
2
; less than 2 m)
or
16 AWG (1.3mm
2
) copper stranded
Heat dissipation 132 W
Power consumption 732 W
Operating conditions Temperature: 0° C to 40° C (32° F to 104° F)
Humidity: 10% to 93% relative humidity, non-condensing
Altitude: 0 to 3000 meters (9,850 ft)
Shock: 10 ms, 3 axis (half sine)
Vibration: 5 to 200 to 5 Hz, 5 to 32 Hz, 0.02îDA, 32-2000 Hz (swept
sine)
Storage and transportation conditions Temperature: –40° C to 70° C (–40° F to 158° F)
Humidity: 60% to 95% relative humidity, non-condensing
Packaged shock: 180 m/s
2
(18g), 6 ms, 600 shocks (half sine)
Packaged sine vibration: 5 to 62 Hz @ velocity 5 mm/s,
62 to 500 Hz @ 0.2 G
Packaged random vibration: 5 to 20 Hz @ 1.0 ASD w/–3 dB/oct. from
20 to 200 Hz
Shock: 14 drops min on sides & corners @ 42" (<15 kg box)
Maximum in-rush current
17 A @115 V/60 Hz, maximum load
Efficiency
85% nominal
Output Ratings for EPS-C chassis with 1, 2, or 3 installed EPS-600LS units
One EPS-600-LS unit 582 W output: –48 V/9 A (432 W), 12 V/12.5 A
Two EPS-600-LS units 1116 W output: –48 V/18 A (864 W), 12 V/21 A
Three EPS-600-LS units
1260 W output: –48 V/21 A (1008 W), 12 V/21 A
Table 86: Summit external power supplies (Continued)