Operating manual.
CNC 8060
CNC 8065
8.
EDISIMU MODE (EDITING AND SIMULATION)
Working in the editing window.
·182·
(REF: 1807)
Description of the geometric help.
Zero offset and preset.
Scaling factor.
This softkey may be used to select the following options:
• Machine zero (home). Cancel any zero offset and assume machine
zero as part zero.
• Absolute zero offset. Set, activate or define + activate absolute zero
offsets (G159).
• Incremental zero offset: Set, activate or define + activate incremental
zero offsets (G158).
• Coordinate preset: Edit the preset value for the active axes. If you do
not wish to preset any of them, leave its field empty (blank).
The cycle internally generates an ISO block with function G53, G159,
G158 or G92.
This softkey may be used to cancel the current scaling factor and activate
a new one. In the latter case, the cycle shows the necessary data to define
the scaling factor.
The cycle internally generates an ISO block with function G72.
To Next Page
Loading...
