Operating manual.
CNC 8060
CNC 8065
EDISIMU MODE (EDITING AND SIMULATION)
8.
Working in the editing window.
·183·
(REF: 1807)
Mirror image.
Rotate the coordinate system.
Corner chamfering and rounding.
This softkey may be used to select the following options:
• Select the desired action, cancel the active mirror image, define a new
one canceling the previous ones or define a new one and add it to the
one currently active.
• Select the axes on which mirror image is applied. For a new mirror
image, you may select between the X, Y or X-Y axes. For an additive
mirror image, you may select between the X and Y axes. This icon is
not shown when selecting mirror image cancellation.
The cycle internally generates an ISO block that contains a combination
of functions G10, G11 and G12.
This softkey may be used to cancel the active coordinate (pattern) rotation,
define a new one canceling the previous one or define a new one and add
it to the currently active one.. When defining or activating a coordinate
(pattern) rotation, the cycle shows the necessary data to define the
coordinate (pattern) rotation..
The cycle internally generates up to two ISO blocks with function G73.
This softkey may be used to define corner rounding or chamfering . In
either case, the cycle shows the necessary data to define the machining
operation.
The cycle internally generates an ISO block with function G36 or G39.
To Next Page
Loading...
