Foundry Networks Switch and Router - Page 161

Using Redundant Management Modules
December 2000 5 - 37
.
3. Edit the value in the Chassis Poll Interval field to change polling interval. You can enter a value from
0 – 65535. The default is 60 seconds.
4. Click the Apply button to send the configuration change to the active module’s running-config file.
5. If you want the change to remain in effect following the next system reload, select the Save
link to save the
configuration change to the active redundant management module's startup-config file. (The change is
automatically sent to the standby module when the active module's system-config file is copied to the standby
module.)