EasyManuals Logo

Foundry Networks Switch and Router User Manual

Default Icon
1070 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #540 background imageLoading...
Page #540 background image
Foundry Switch and Router Installation and Configuration Guide
15 - 98 December 2000
TCP Statistics
0 active opens, 0 passive opens, 0 failed attempts
0 active resets, 0 passive resets, 0 input errors
138 in segments, 141 out segments, 4 retransmission
RIP Statistics
0 requests sent, 0 requests received
0 responses sent, 0 responses received
0 unrecognized, 0 bad version, 0 bad addr family, 0 bad req format
0 bad metrics, 0 bad resp format, 0 resp not from rip port
0 resp from loopback, 0 packets rejected
The show ip traffic command displays the following information.
Table 15.17: CLI Display of IP Traffic Statistics Layer 3 Switch
This Field... Displays...
IP statistics
received The total number of IP packets received by the device.
sent The total number of IP packets originated and sent by the device.
forwarded The total number of IP packets received by the device and forwarded
to other devices.
filtered The total number of IP packets filtered by the device.
fragmented The total number of IP packets fragmented by this device to
accommodate the MTU of this device or of another device.
reassembled The total number of fragmented IP packets that this device re-
assembled.
bad header The number of IP packets dropped by the device due to a bad packet
header.
no route The number of packets dropped by the device because there was no
route.
unknown proto The number of packets dropped by the device because the value in
the Protocol field of the packet header is unrecognized by this device.
no buffer This information is used by Foundry customer support.
other errors The number of packets that this device dropped due to error types
other than the types listed above.
ICMP statistics
The ICMP statistics are derived from RFC 792, Internet Control Message Protocol, RFC 950, Internet
Standard Subnetting Procedure, and RFC 1256, ICMP Router Discovery Messages. Statistics are organized
into Sent and Received. The field descriptions below apply to each.
total The total number of ICMP messages sent or received by the device.
errors This information is used by Foundry customer support.
unreachable The number of Destination Unreachable messages sent or received
by the device.
time exceed The number of Time Exceeded messages sent or received by the
device.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Foundry Networks Switch and Router and is the answer not in the manual?

Foundry Networks Switch and Router Specifications

General IconGeneral
BrandFoundry Networks
ModelSwitch and Router
CategorySwitch
LanguageEnglish

Related product manuals