Foundry Networks Switch and Router User Manual

Foundry Switch and Router Installation and Configuration Guide
18 - 44 December 2000
5. Enter a value from 40 – 8000 into the Neighbor Router Timeout field.
6. Click the Apply button to save the change to the device’s running-config file.
7. Select the Save
link at the bottom of the dialog. Select Yes when prompted to save the configuration change
to the startup-config file on the device’s flash memory.
Modifying Route Expires Time
The Route Expire Time defines how long a route is considered valid in the absence of the next route update.
Possible values are from 20 – 4000 seconds. The default value is 200 seconds.
USING THE CLI
To modify the route expire setting to 50, enter the following:
BigIron(config-dvmrp-router)# route-expire-timeout 50
Syntax: route-expire-timeout <20-4000>
USING THE WEB MANAGEMENT INTERFACE
1. Log on to the device using a valid user name and password for read-write access.
2. Click on the plus sign next to Configure in the tree view to expand the list of configuration options.
3. Click on the plus sign next to DVMRP in the tree view to expand the list of DVMRP option links.
4. Click on the General
link to display the DVMRP configuration panel.
5. Enter a value from 20 – 4000 in the Route Expire Time field.
6. Click the Apply button to save the change to the device’s running-config file.
7. Select the Save
link at the bottom of the dialog. Select Yes when prompted to save the configuration change
to the startup-config file on the device’s flash memory.

Foundry Networks Switch and Router Specifications

General

Brand	Foundry Networks
Model	Switch and Router
Category	Switch
Language	English