EasyManuals Logo

Foundry Networks Switch and Router User Manual

Default Icon
1070 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #952 background imageLoading...
Page #952 background image
Foundry Switch and Router Installation and Configuration Guide
25 - 32 December 2000
This completes the configuration for NetIron-A. The configuration for NetIron-B and C is very similar except for a
few issues.
• IP sub-nets and IPX networks configured on NetIron-B and NetIron-C must be unique across the entire
network, except for the backbone port-based VLANs 5, 6, and 7 where the sub-net is the same but the IP
address must change.
• There is no need to change the default priority of STP within VLAN 4.
• There is no need to include a virtual router interface within VLAN 4.
• The backbone VLAN between NetIron-B and NetIron-C must be the same at both ends and requires a new
VLAN ID. The VLAN ID for this port-based VLAN is VLAN 7.
Configuration for NetIron-B
Enter the following commands to configure NetIron-B.
NetIron> en
No password has been assigned yet...
NetIron# config t
NetIron(config)# hostname NetIron-B
NetIron-B(config)# router ospf
NetIron-B(config-ospf-router)# area 0.0.0.0 normal
NetIron-B(config-ospf-router)# router ipx
NetIron-B(config-ospf-router)# vlan 2 name IP-Subnet_1.1.6.0/24
NetIron-B(config-vlan-2)# untag e1 to 4
NetIron-B(config-vlan-2)# no spanning-tree
NetIron-B(config-vlan-2)# router-interface ve1
NetIron-B(config-vlan-2)# other-proto name block-other-protocols
NetIron-B(config-vlan-other-proto)# no dynamic
NetIron-B(config-vlan-other-proto)# exclude e1 to 4
NetIron-B(config-vlan-other-proto)# int ve1
NetIron-B(config-vif-1)# ip addr 1.1.6.1/24
NetIron-B(config-vif-1)# ip ospf area 0.0.0.0
NetIron-B(config-vif-1)# vlan 8 name IPX_Network6
NetIron-B(config-vlan-8)# untag e 5 to 8
NetIron-B(config-vlan-8)# no span
NetIron-B(config-vlan-8)# router-int ve2
NetIron-B(config-vlan-8)# other-proto name block-other-protocols
NetIron-B(config-vlan-other-proto)# no dynamic
NetIron-B(config-vlan-other-proto)# exclude e5 to 8
NetIron-B(config-vlan-other-proto)# int ve2
NetIron-B(config-vif-2)# ipx net 6 ethernet_802.3
NetIron-B(config-vif-2)# vlan 3 name IP_Sub_&_IPX_Net_VLAN
NetIron-B(config-vlan-3)# untag e9 to 16
NetIron-B(config-vlan-3)# no spanning-tree
NetIron-B(config-vlan-3)# ip-subnet 1.1.7.0/24
NetIron-B(config-vlan-ip-subnet)# static e9 to 12
NetIron-B(config-vlan-ip-subnet)# router-interface ve3
NetIron-B(config-vlan-ip-subnet)# ipx-network 7 ethernet_802.3
NetIron-B(config-vlan-ipx-network)# static e13 to 16
NetIron-B(config-vlan-ipx-network)# router-interface ve4
NetIron-B(config-vlan-ipx-network)# other-proto name block-other-protocols
NetIron-B(config-vlan-other-proto)# exclude e9 to 16
NetIron-B(config-vlan-other-proto)# no dynamic
NetIron-B(config-vlan-other-proto)# interface ve 3
NetIron-B(config-vif-3)# ip addr 1.1.7.1/24
NetIron-B(config-vif-3)# ip ospf area 0.0.0.0
NetIron-B(config-vif-3)# int ve4
NetIron-B(config-vif-4)# ipx network 7 ethernet_802.3
NetIron-B(config-vif-4)# vlan 4 name Bridged_ALL_Protocols

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Foundry Networks Switch and Router and is the answer not in the manual?

Foundry Networks Switch and Router Specifications

General IconGeneral
BrandFoundry Networks
ModelSwitch and Router
CategorySwitch
LanguageEnglish

Related product manuals