101
EN
Naming and re-
naming charac-
teristics
Example of a "Data" screen for characteristic XYZ
Call up "Optimizing & managing cha-
racteristics" menu item
– The last "Data" screen called up
appears.
Whatever screen is showing, press F1
"Managing characteristics":
– The 1st screen in the wizard appe-
ars ("Managing characteristics")
"Managing characteristics" screen
Select the desired characteristic using
the adjusting dial (18)
Press F1 "Select characteristic"
– "Name characteristic" screen ap-
pears
"Name characteristic" screen
Select corresponding characters using
the adjusting dial (18)
Press F4 ">" to enter the next charac-
ter
– Corrections can be carried out by
pressing F3 "<" or F2 "< Delete".
Press F1 "Accept" when finished:
– The new name is accepted, "Ma-
naging characteristics" screen ap-
pears
1
2
3
4
5
6
7
To Next Page
Loading...