Fronius RCU 5000i - TIG Welding; Call up TIG Welding Menu Item; Setting Working Parameters

63
EN
TIG welding
Call up "TIG weld-
ing" menu item
Main menu: "TIG welding" menu item selected
Press the "Menu" button (1)
– Main menu appears
Select "TIG welding" menu item using
the adjusting dial (18)
Press OK (3)
– The last "Data" screen called up
appears
Setting working
parameters
TIG welding: "Working parameters" screen, main cur-
rent selected
Call up "TIG welding" menu item
Select "Working parameters" screen
by pressing the right arrow key (8)
– "Working parameters" screen ap-
pears.
Select the corresponding working pa-
rameters using down (6) or up (7) keys
Use the adjusting dial (18) to alter the
parameter value
– The parameter value can only be
altered within the defined setting
range. The setting range is high-
lighted.
1
2
3
1
2
3
4