92
Explanation of
job-specific docu-
mentation
Parameter Setting Result
Documentation On In job welding, the present welding values in the
selected job are documented according to the
"Every n-th seam" and "Every n seconds" param-
eters
Off The present welding values in the selected job are
not documented in job welding
Every n-th seam 1 In job welding, the present welding values in the
selected job are documented at every (weld)
seam
2 In job welding, the present welding values in the
selected job are documented at every 2nd (weld)
seam
...
100 In job welding, the present welding values in the
selected job are documented at every 100 (weld)
seams (= maximum)
Every n seconds Off The present welding values of the selected job are
documented once per seam
0.1 The present welding values in the selected job are
documented in job welding every 0.1 seconds.
0.2 The present welding values in the selected job are
documented in job welding every 0.2 seconds.
...
9.9 The present welding values in the selected job are
documented in job welding every 9.9 seconds (=
maximum)
To Next Page
Loading...