212
RCU 5000i - Updating software
Requirements The following programs are required for updating the RCU 5000i software:
- LocalNetUSB driver (on the "Software Tools" CD-ROM)
- BASICLoad software V2.83.2 or higher (on the "Software Tools" CD-ROM)
- Current RCU 5000i firmware (for registered TechGuide users, TechGuide Online:
http://www.fronius.com/techguide, or via Fronius customer service)
Before first up-
date - installing
LocalNet USB
driver
Insert the "Software Tools" CD-ROM into your computer's CD drive
If the CD-ROM does not open automatically, open CD-ROM
Start page appears
"Software Tools" CD-ROM - start page
Select language
"Download Information" page appears
"Software Tools" CD-ROM - "Download Information" page
Select "Firmware RCU 5000i"
1
2
3
4
To Next Page
Loading...