85
EN
Retrieving and changing process settings for a se-
lected job
General The sequence of screens shown on the "clothesline" depends on the type of job selected.
Retrieving and
changing job pro-
cess settings
Call up the "Optimizing & managing jobs" menu item
Whatever screen is showing, select "Group n°" parameter using the down (6) or up (7)
keys
Select desired group (0 - 99) using the adjusting dial (18)
Select "Job n°" parameter using the down (6) or up (7) keys
Select desired job (0 - 999) using the adjusting dial (18)
– If a job is selected from the next group, the group displayed also changes accord-
ingly.
Optimizing and managing jobs: "Process settings"
screen
Select "Process settings" screen by
pressing the right arrow key (8)
– "Process settings" screen appears
Select the corresponding parameters
using down (6) or up (7) keys
Use the adjusting dial (18) to alter the
parameter value
– A parameter value can only be al-
tered within the defined setting
range. The setting range is high-
lighted.
1
2
3
4
5
6
7
8
To Next Page
Loading...