Fronius RCU 5000i - Managing Characteristic Points; Select Characteristic Points; Inserting Characteristic Points

104
Managing characteristic points
Select character-
istic points
Example of a "Data" screen for characteristic XYZ
Call up "Optimizing & managing cha-
racteristics" menu item
– The last "Data" screen called up
appears.
Press F1 "Managing characteristics"
and select the corresponding characte-
ristic
Whatever screen is showing, select the
characteristic point to be altered by
pressing F2 or F5:
– F2 "Previous point" ... the charac-
teristic point before the current
one appears. The first point in the
characteristic, F2 "Previous point"
is greyed out.
– F5 "Next point" ... the characteri-
stic point after the current one ap-
pears. With the last point in the
characteristic, F5 "Next point" is
greyed out.
Inserting charac-
teristic points
Example of a "Data" screen for characteristic XYZ
Call up "Optimizing & managing cha-
racteristics" menu item
– The last "Data" screen called up
appears.
Press F1 "Managing characteristics"
and select the corresponding characte-
ristic
Whatever screen is showing, press F3
"Insert point":
– The 1st screen in the wizard appe-
ars ("Insert characteristic point")
1
2
3
1
2
3