155
EN
Machine pre-sets
General The following functions can be carried out in the "Machine pre-sets" menu item:
- Setting machine pre-sets for MIG/MAG, TIG, MMA and job welding
- Setting date and time
- User management - setting up profiles and keys
- Setting language and units of measurement
- Displaying the version data
Call up the "Ma-
chine pre-sets"
menu item
Main menu: "Machine pre-sets" menu item selected
Press the "Menu" button (1)
– Main menu appears
Select "Machine pre-sets" menu item
using the adjusting dial (18)
Press OK (3):
– The last "Data" screen called up
appears.
Overview
1
2
3
"Machine pre-sets" is composed of the following sections:
- Setting machine pre-sets for weld-
ing
- RCU 5000i - Unlock function
- Setting the language and units of
measurement
- Ethernet setting - RCU 5000i - displaying version data
- Setting date and time
- Robot interface - robot welding - Creating backup
- Profiles / Keys - Restoring data
- Recommendation for creating pro-
files and keys
- Aligning wirefeeder or push-pull unit
- Creating and editing profiles - L/R alignment - aligning welding cir-
cuit inductivity and welding circuit
resistance
- Example profiles
- Creating and editing keys
- Logging registered users on and off
at the remote control unit
- RCU 5000i - Resetting to factory
settings
To Next Page
Loading...