Fronius RCU 5000i - Retrieving a Welding Program; Select Welding Program

47
EN
Retrieving a welding program
Select welding
program
MIG/MAG standard manual welding: "Welding pro-
gram" screen
Call up "MIG/MAG standard manual
welding" menu item
Select "Welding program" screen by
pressing the right arrow key (8)
– "Welding program" screen appe-
ars
The "Welding program" screen contains the following data:
- Filler metal
- Wire diameter
- Shielding gas
- Reference number(s) for the stored welding program characteristic(s)
e.g.:
For AlSi5 with Ø 1.2 mm and shielding gas 100 % Ar, there is a pulsed characteristic,
a standard characteristic and a CMT characteristic
1
2