62
Switching to ex-
tra-large display
The welding current and welding voltage parameters can be displayed in extra-large for-
mat:
Rod electrode (MMA) welding: "Extra-large display"
screen
Call up "Rod electrode (MMA) welding"
menu item
Select "Extra-large display" screen by
pressing the right arrow key (8)
– "Extra-large display" screen appe-
ars
– The value for the welding ampera-
ge can be altered in the "Extra-lar-
ge display" screen by using the
adjusting dial (18).
– Welding voltage is a display value:
- during welding
... actual value
- following welding
... hold value
Setting process
settings parame-
ters
Rod electrode (MMA) welding: "Process settings"
screen, hotstart current HCU selected
Call up "Rod electrode (MMA) welding"
menu item
Select "Process settings" screen by
pressing the right arrow key (8).
– "Process settings" screen appears
Select the process settings parameters
using the down (6) or up (7) keys
Change the value of the process set-
ting using the adjusting dial (18)
– The value of the process settings
parameters can only be altered wi-
thin the defined setting range. The
setting range is highlighted.
1
2
1
2
3
4
To Next Page
Loading...