32
Main menu in the "Locked" profile
The "Locked" profile is called up.
"MIG/MAG synergic welding" menu item in locked re-
mote control, "Working parameters" screen
Various menu items and functions can be
selected, depending on which presettings
are saved in the "Locked" profile.
E.g.:
In the main menu, the factory setting of the
"Locked" profile allows access to the wel-
ding processes. Keys are not available in
the individual "Data" screens.
The parameters in each "Data" screen can
be selected using the down (6) or up (7)
keys, and altered using the adjusting dial
(18).
Unlocking the
RCU 5000i
Holding the keycard up to the keycard reader
Hold the keycard up to the keycard
reader (16)
IMPORTANT! The properties in the
"Locked" profile can be altered in the "Ma-
chine pre-sets" menu item, in the "Profiles /
Keys" screen.
(16)
1
To Next Page
Loading...