Fronius RCU 5000i - Creating Backup; General

199
EN
Creating backup
General With the "Backup" function, all data for the remote control can be saved:
- Current parameter settings
- Jobs
- User characteristics
- Set welding programs
- Default machine settings
- Documentation settings
- Set welding data, etc.
The backup is saved on the memory card. The file format used here "*.FBC" is not normally
visible.
Creating backup
Inserting the memory card
Insert the memory card into the memo-
ry card slot (24)
Call up the "Machine pre-sets" menu
item
Using the right key (8) select a screen
that has "Backup" and "Restore" on
keys F1 and F2
Whatever screen is showing, press F1
"Backup"
– "Name backup" screen appears
– The current date and time are pro-
posed as the backup name, e.g.:
"Name backup" screen
Select corresponding characters using
the adjusting dial (18)
Press F4 ">" to enter the next charac-
ter
– Corrections can be carried out
using F3 "<" or F2 "< Delete"
Press F1 "Accept" when finished:
(24)
IMPORTANT! The memory card must not
be write-protected.
03021116
Hour
Day
Month
Year
1
2
3
4
1
2
3